DIY RV Roof Replacement

 

TOOLS USED

  • Just a roller and a cleaning brush

Materials

 

How to replace your RV roof yourself!

There is many ways to tackle a job but this is how I tackled replacing all the roof fixtures and rotted wood on my 99 Fleetwood Bounder.

First step was to replace all the exhaust fans and vents… why? Well if i’m going to go through the effort of sealing up the roof then I want to make sure everything is new or at least in working order. In my case I also replaced the plumbing vents and skylight too.

After all that was redone and resealed, I cleaned the rood and assessed any damage that needs to be fixed. My roof had some rot on it from years of a leaking antenna. Once. I had that fixed I followed the Crazy Seal instructions and cut. in all the roof fixtures, finishing it up with rolling 2 coats on top.

 

Zach's pro tip

I would consider replacing all the roof fixtures before rolling. on the crazy seal. This will make it so you dont have to redo anything later.

 
Previous
Previous

Teardrop Camper Build in less than 10min (Timelapse)

Next
Next

Organize your shop with Wall Control & Workbench plans