What is fly cutting? | Axiom AR8 Pro CNC

You can learn more about the Axiom AR8

Ok guys, so you probably noticed I got a new Axiom CNC, well the first thing you will want to do is Fly cut the built in waste board. This will insure that the gantry and the waste board are perfecting parallel. You don't need to cut of much to make a huge difference!

The bit I used!

Carbide Tipped Bottom Cleaning / Spoilboard: 1-1/2 Dia x 5/8 x 1/2 Inch Shank Upshear Design

You can download the FlyCut VCARVE file here for your Axiom AR8 machine. Please double check all the settings before using!