Hatch & Stuff | How to build a Teardrop Trailer #19
I started off this build to just button up some loose ends in the hatch area of the teardrop. I knew I wanted to add the door knobs that I did in the last video to the rear doors as well as add a drip ledge on the “countertop”. For the countertop I made the stainless screws 6in apart and used a piece of leftover aluminum trim that I used in other places on the teardrop. (There is more of this I might use too)
If you have a REALLY good eye (Mark) you would have noticed I had an offcut of Purebond plywood when I made the spacer for the cabinet drawer slide. Well I decided to make a catch all box with it.. because I have ADD. Inside is just painted black and the outside is lacquer.
Next I get to play around with getting the hatch springs in place so I don’t have to use the pole to hold it up. After I get the structure in place for that I can skin the top of the hatch to match the inside of the teardrop! That is going to look good!
If you haven’t already, make sure you Subscribe to the newsletter to get up to date updates on what’s going on in my shop!
Watch the whole build process! (Grab some popcorn first)
Check out those pants I’m wearing – https://goo.gl/V7jjp5
Push button catch door knobs – https://www.amazon.com/gp/product/B01B95O70S/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1
Teardrop Trailer Build Playlist – https://www.youtube.com/playlist?list=PLRo2-oLCRSD7-HwKlRXiUfhlfzdDJjTWE
Want to show your support, consider donating a couple bucks a month on Patreon – https://www.patreon.com/southernginger