Atlanta Falcons custom iPhone | Will it CNC? #3

By  | 

Hey guys, I know you will all be watching the Super Bowl but I wanted to do something fun and try to carve an iPhone using the CNC. My thought was, why not use the Atlanta Falcons logo? lol. It was a good proof of concept. In the future I think I could slow down the bit’s feed rate to get a smoother cut. I was getting some chatter at the speed I was trying to run it at. Also the 20deg V-bit isn’t the best for an operation like this but that is what I has to work with.


CNC Settings

Relief Dimensions:

Width: 1.50000 inches Height: 1.50000 inches
Min X: -0.75000 inches Min Y: -0.75000 inches
Min Z: 0.00000 inches Max Z: 0.00000 inches

Material Thickness = 0.0400 inches

Z Zero = Top of material

Machining Time: 00:18:03


V-Bit Carving – Conical 20Deg

Tool: [1] 10.0 deg. conical with 0.006 inches tip rad.
Feed Rate: 50.00000 inch/min
Plunge Rate: 31.50000 inch/min
Safe Z: 0.20000 inches
Spindle Speed: 20000 r.p.m
Stepover: 0.00300 inches
Tolerance: 0.00100 inches
Allowance: 0.00000 inches
Home Position: X:0.00000 Y:0.00000 Z:0.20000
Comments: V-Bit Carving

Finish Depth: 0.02000

Feed Rate Length: 175.9 inches
Plunge Rate Length: 12 inches
Rapid Rate Length: 30 inches
Machining Time: 00:18:03


Machining time estimates based on a rapid feedrate
of 0.000 mm/sec and a time scaling factor of 4.00


iPhone Screen Background